| 考虑铁损的感应电动机节能控制 |
| 投稿时间：2014-10-16 修订日期：2014-11-20 点此下载全文 |
| 引用本文：魏彪,王步来,魏明,钱德鹏,吴颖君,季珊珊.考虑铁损的感应电动机节能控制[J].上海海事大学学报,2015,36(2):84-88. |
| 摘要点击次数: 1408 |
| 全文下载次数: 754 |
|
|
|
| 中文摘要:为提高感应电动机的运行效率,提出一种快速响应且节能的控制方法.基于矢量控制原理，建立一种带转矩控制和磁链调节器的感应电动机最佳磁链节能控制策略.首先,建立考虑铁损的感应电动机数学模型;然后,根据数值分析方法求得系统最高效率时的最佳磁链的表达式;最后,利用MATLAB搭建节能控制系统的仿真模型.仿真结果表明，这种控制策略不仅可以改善节能效果，而且能够改善感应电动机的动态性能，这种控制方式是正确和可行的. |
| 中文关键词:快速响应 节能控制 感应电动机 转矩控制 最佳磁链 |
| |
| Energy saving control of induction motor considering core loss |
|
|
| Abstract:In order to improve the running efficiency of induction motors, a fast response and energy saving control method is proposed. Based on the vector control theory, an energy saving control strategy of the optimal flux of induction motors with torque control and flux regulators is built. At first, a mathematical model of induction motors considering core loss is established. Then, the expression of the optimal flux that is obtained when the system is at the highest efficiency is obtained according to the numerical analysis method. Finally, the simulation model of the energy saving control system is built by MATLAB. The simulation results show that the control strategy can not only improve the energy saving effect, but also improve the dynamic performance of induction motors. Thus, the control method is correct and feasible. |
| keywords:fast response energy saving control induction motor torque control optimal flux |
| 查看全文 查看/发表评论 下载PDF阅读器 |
| 关闭 |
|
|
|
|
|
